I use RANCID ton a number of routers. About five days ago, it started
failing on three routers. If I manually connect to these routers, it
seems to work for a minute or so and then the telnet session gets
disconnected. The disconnect only occurs during a data transfer such as
"show conf"
I tested it from several places so the telnet client doesn't seem to be
a factor. The routers are all on different ISPs and in different
cities. The only common denominator between the failing routers is they
are all set to use a port other than 23. This is done by natting the
external port to port 23 on a null interface.
Rebooting the routers didn't help
Any ideas?
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
