Hi dear,
For one of our customer I'v to track an IP session and check that the traffic is flowing correctly throughout our network. I need to check that traffic with src IP 1 and dst IP 2 is indeed passing through the correct interfaces. To accomplish this, I'v found the following paper: http://www.cisco.com/en/US/tech/tk801/tk379/technologies_tech_note09186a0080 17874c.shtml But this implies disabling CEF on our devices and it seems that we have to disable CEF either on the input and the output interface. With some hundreds of mbits going through those interface, I'm not really wanting to see what the router will do with CEF disabled. Therefore, my question is: do you know any other way to debug an IP session based on src/dst ip address? Without impact too much the router perf J Thanks for your help, Henry-Nicolas Tourneur. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
