Hi, Can't you use the Netflow to track the flow .. or traffic export just an idea [http://www.cisco.com/en/US/docs/ios/12_4t/12_4t11/ht_rawip.html]
Regards, Gobi. On Wed, Jan 4, 2012 at 9:24 PM, Henry-Nicolas Tourneur < [email protected]> wrote: > Hi dear, > > > > For one of our customer I'v to track an IP session and check that the > traffic is flowing correctly throughout our network. > > I need to check that traffic with src IP 1 and dst IP 2 is indeed passing > through the correct interfaces. > > > > To accomplish this, I'v found the following paper: > > > http://www.cisco.com/en/US/tech/tk801/tk379/technologies_tech_note09186a0080 > 17874c.shtml > > > > But this implies disabling CEF on our devices and it seems that we have to > disable CEF either on the input and the output interface. > > With some hundreds of mbits going through those interface, I'm not really > wanting to see what the router will do with CEF disabled. > > > > Therefore, my question is: do you know any other way to debug an IP session > based on src/dst ip address? Without impact too much the router perf J > > > > Thanks for your help, > > > > Henry-Nicolas Tourneur. > > > > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
