Major (minor) typo on my part. IOS-XE on an ASR 1004. Who put the E and
the R so close together on the keyboard? Switching to Dvorak....
-Hammer-
"I was a normal American nerd"
-Jack Herer
On 2/2/2012 2:28 PM, Brian Christopher Raaen wrote:
is this for IOS-XE on an ASR1000 or IOS-XR on an ASR 9000. I'm
assuming that you mean a ASR1000, but your subject was asking about
IOS-XR which only runs one ASR9000, CRS-1, or CRS-3
---
Brian Raaen
Network Architect
Zcorum
On Thu, Feb 2, 2012 at 3:20 PM, -Hammer-<[email protected]> wrote:
Based on the number of questions I see here and on NANOG I guess the
documentation is limited or hard to find on the ASRs. Can anyone provide a
link to some documentation specific to LACP configuration on the XE
software? I understand the functionality showed up somewhere around 2.5-2.6
but my gear is still on order and I have to start figuring things out. CCO
didn't really help much except for generic docs. Maybe that's all I need....
--
-Hammer-
"I was a normal American nerd"
-Jack Herer
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
