Thanks for the suggestions... I checked the fibre with Fluke meter, the loss is very high in one of the cores, i cleaned with proper solutions provided by fluke. In this case, is it possible that one side the link is down and other side there is no link change in the switch ?
Thanks, Ambi. On Sat, Feb 18, 2012 at 12:29 AM, Alex Moya <[email protected]> wrote: > Shoulds like the ports or modules the fiber plug into > On Feb 16, 2012 2:14 AM, "Ambedkar" <[email protected]> wrote: > >> Hi, >> There is a problem in our network. Two switches are directly connected via >> Multimode fibre, the link is working fine. But sometimes the link is down >> in switch-A for 7 seconds and becoming UP. The logging messages shows that >> link is down and UP in switch-A. There is no err-disable messages >> anywhere. >> >> But there is no logging message regarding up/down in respective switch-B. >> >> Unable to understand what is the problem. >> >> Please give suggestions. >> >> thanks, >> Ambi >> _______________________________________________ >> cisco-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ >> > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
