> -----Original Message----- > From: [email protected] [mailto:cisco-nsp- > [email protected]] On Behalf Of Ambedkar > Sent: Wednesday, 22 February 2012 2:37 PM > To: [email protected] > Subject: Re: [c-nsp] Fibre link flapping > > Thanks for the suggestions... > > I checked the fibre with Fluke meter, the loss is very high in one of the > cores, i cleaned with proper solutions provided by fluke. In this case, is > it possible that one side the link is down and other side there is no link > change in the switch ? > > Thanks, > Ambi. >
Yes TX -> RX RX -> TX If you wish to shut the port down in the case of unidirectionality have a look at BFD. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
