Hi Alessandro, Please suggest the configuration , if that can help avoid loop.
Regards On Tue, Mar 13, 2012 at 5:58 PM, Alessandro Braga <[email protected]> wrote: > On Nexus devices, Ensure that you are configuring the ports correctly for the > type of device to which the interface is connected. > > Att, > Alessandro Braga > CCIE #30393 > > > On Mar 13, 2012, at 8:56, jack daniels <[email protected]> wrote: > >> Hi Guys, >> >> I have a scenario for which I'm scratching my head since long - please help >> >> >> Nexus 5K-1---------Nexus5K-2 >> | | >> | | >> Nexus2K-1 Nexus2K-2 >> | | Port eth 1/1 >> | | >> Cisco 3750----------------------- >> >> >> In this scenario Switching LOOP is getting formed. Only way I'm able >> to get rid is shutdown Port eth1/1 on Nexus2K-2. Please help in this >> case. >> >> Thanks in anticipation in adavance. >> >> Regards >> _______________________________________________ >> cisco-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
