Switch the 3750 to use flex links. That way you can have redundancy without causing a loop. On Mar 13, 2012 9:50 AM, "Ryan West" <[email protected]> wrote:
> N2k's do not run spanning-tree and will block ports if a bpdu is detected. > You can disable spanning tree on those ports, but your 3750 will be flat at > that point. > > Sent from handheld > > On Mar 13, 2012, at 8:57 AM, "Nick Hilliard" <[email protected]> wrote: > > > On 13/03/2012 11:56, jack daniels wrote: > >> In this scenario Switching LOOP is getting formed. Only way I'm able > >> to get rid is shutdown Port eth1/1 on Nexus2K-2. Please help in this > >> case. > > > > are the 3750 and both the n5k boxes running spanning tree? > > > > Nick > > > > _______________________________________________ > > cisco-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/cisco-nsp > > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
