Hi, I have the following card SPA-1XOC12-POS on a Cisco ASR.
show int pos0/2/0 POS0/2/0 is down, line protocol is down Hardware is SPA-1XOC12-POS MTU 4470 bytes, BW 622000 Kbit/sec, DLY 100 usec, I wanted to know if the card can be configured to work as STM1. If so how the configuration is to be done. Regards, Shake Righa _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
