From the release notes of ASA v8.4.4 ED: "The maximum number of
simultaneous ASDM, SSH, and Telnet sessions allowed was added."
To set the maximum number of simultaneous ASDM, SSH, and Telnet sessions
that are allowed on the ASA, use the quota management-session command in
global configuration mode. To set the quota to the default value, use
the no form of this command.
quota management-session <number>
On 6/6/2012 11:28 AM, Edward Salonia wrote:
I wonder if config lock is available on asa's?
http://esalonia.net/2010/11/18/config-lock/
- Ed
-----Original Message-----
From: "Hansen, Ulrich Vestergaard B. (E W EN R&D DT ES 1 2)"<[email protected]>
Sender: [email protected]: Wed, 6 Jun 2012 12:28:49
To: [email protected]<[email protected]>
Subject: [c-nsp] ASA - SSH/ASDM - Current logged on users
Hi nsp-group!
Is there a command or method to display the current logged on users on Cisco ASA - like
you can issue the "who" command in IOS.
Or is there a way we can display a visual banner upon login to ASDM displaying
who is working on the device?
We would like to avoid multiple users working on the same ASA at the same time.
Best regards
Ulrich
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
