Hi All Thanks so far.
Unfortunately - Show asdm sessions only yields the source IP address and not the user who is currently working on the device. So does it via the GUI | Monitoring -> properties -> Device Access and click ASDM/HTTPS/Telnet/SSH Sessions Show ssh sessions works fine, but most of our people are using the ASDM. quota management-session is not available either on 8.0(5). Maybe it's time for a scheduled update. Any other ideas? Copy/paste from Help: The following table describes the fields for monitoring active ASDM/HTTPS/Telnet sessions. Type The type of connection (ASDM/HTTPS/Telnet). Session ID The name of a currently connected ASDM/HTTPS/Telnet session. IP Address The IP address of the host or network that is currently connected to the security appliance. Disconnect Disconnects the selected ASDM/HTTPS/Telnet session from the security appliance. Refresh Refreshes the dialog box display. The following table describes the fields for monitoring active SSH sessions. Client The client type for the selected SSH session. User The user name for the selected SSH session. State The state of the selected SSH session. Version The version of SSH used to connect to the security appliance. Encryption (In) The inbound encryption method used for the selected session. Encryption (Out) The outbound encryption method used for the selected session. HMAC (In) The configured HMAC for the selected inbound SSH session. HMAC (Out) The configured HMAC for the selected outbound SSH session. SID The session ID of the selected session. Disconnect Disconnects an active SSH session connected to the security appliance. Refresh Refreshes the dialog box display. Best regards Ulrich -----Original Message----- From: Chuck Church [mailto:[email protected]] Sent: 6. juni 2012 18:49 To: Hansen, Ulrich Vestergaard B. (E W EN R&D DT ES 1 2); [email protected] Subject: RE: [c-nsp] ASA - SSH/ASDM - Current logged on users Show ssh sess and show asdm sess should do it. Chuck -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Hansen, Ulrich Vestergaard B. (E W EN R&D DT ES 1 2) Sent: Wednesday, June 06, 2012 6:29 AM To: [email protected] Subject: [c-nsp] ASA - SSH/ASDM - Current logged on users Hi nsp-group! Is there a command or method to display the current logged on users on Cisco ASA - like you can issue the "who" command in IOS. Or is there a way we can display a visual banner upon login to ASDM displaying who is working on the device? We would like to avoid multiple users working on the same ASA at the same time. Best regards Ulrich _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
