On Tue, Jun 12, 2012 at 10:28:27PM +0800, Xu Hu wrote: > We bought VS-S720-10G engine for VSS in 6509, but now the customer don't > want use the VSS mode, they just want to use that as normal engine. > > So now we are wondering if we use the 10G port for normal Layer2 or Layer3 > traffic, will it impact our engine performance or CPU utilization? Is there > any detail document talking about this? > > If ok, then by default, each engine will have two X2 port, so totally we > will have four 10G port to use as normal data transmission? > > Will appreciate for any reply, please share with me with your experience > about this case.
We successfully converted a pair of VSS switches into two standalone switches without issue, but continuing to use the supervisor 10GE ports as a 20GE port channel between the two switches. We have had no issues with performance on the ports. -- Brandon Ewing ([email protected])
pgpu8v79xiCQb.pgp
Description: PGP signature
_______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
