Hi Phil Mayers, Thanks for your reply. Keep waiting for the information from other experts.
Best Regards, Hu Xu 2012/6/12 Phil Mayers <[email protected]> > On 12/06/12 15:28, Xu Hu wrote: > >> Hi Experts, >> >> >> >> We bought VS-S720-10G engine for VSS in 6509, but now the customer don't >> want use the VSS mode, they just want to use that as normal engine. >> >> So now we are wondering if we use the 10G port for normal Layer2 or Layer3 >> traffic, will it impact our engine performance or CPU utilization? Is >> there >> any detail document talking about this? >> > > If I recall correctly, the sup720-10G is actually slight faster than a > sup720 - it's really a "sup760". So the fabric has enough capacity. > > As long as you have enough PFC capacity (either because you're using DFCs, > or because you only have a few ports) then it should work just fine. > > That is: the 10G ports are normal ports, and can be used normally. > > Disclaimer: I've never tried it. > > ______________________________**_________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/**mailman/listinfo/cisco-nsp<https://puck.nether.net/mailman/listinfo/cisco-nsp> > archive at > http://puck.nether.net/**pipermail/cisco-nsp/<http://puck.nether.net/pipermail/cisco-nsp/> > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
