Dear Alan Yes.That feature set is not available in 3550.
If possible can u send a sample of the script which you are using to bring down the port after a certain time. Thanks Arun On Sun, Jun 24, 2012 at 8:07 PM, alan buxey <[email protected]> wrote: > Hi, > > > I would like to shutdown certain switch ports in my cisco 3550 switch > > automatically after a specific time. > > I tried configuring Time range with access list.But that only denies the > ip > > traffic to the port while the port remains UP. > > I need the port to be down and then get the intimation about the port > gone > > down in my syslog server through traps,which is not possible through time > > range as the port remains in the UP state. > > very easy with energywise....but this is 3550 so doesnt have that > featureset for > timers.... we used to just use extrenal scripts which would use SNMP to > UP/DOWN > a port at certain times > > alan > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
