Matthew,
Another option is to but a 7606 chassis (pretty cheap refurb) and put
the line-cards and supervisor in the 7606 chassis. This chassis does
support most classic line cards and the SUP720 supervisor.
7606 is supported until march 2015.
Rinse
Op 11-7-2012 16:20, Matthew Huff schreef:
Unfortunately, the entire support is tied to the chassis, so support for the
line cards, sup engine, etc will become EOS without the
chassis under support.
----
Matthew Huff | 1 Manhattanville Rd
Director of Operations | Purchase, NY 10577
OTA Management LLC | Phone: 914-460-4039
aim: matthewbhuff | Fax: 914-460-4139
-----Original Message-----
From: Nick Hilliard [mailto:[email protected]]
Sent: Wednesday, July 11, 2012 9:21 AM
To: Matthew Huff
Cc: '[email protected]'
Subject: Re: [c-nsp] Third-Party support providers for 650x switches ???
On 11/07/2012 13:43, Matthew Huff wrote:
We have 4 x 6509 switches, each with 2 x Sup720 cards. In November,
they non-E chassis go EOSL. At this time we can't justify upgrading them
to the E chassis. Are there any providers that provide past EOSL support
that anyone would recommend?
Just get a cold spare from ebay? It's just the chassis that's going EoS,
and they're pretty cheap.
Nick
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
