Thanks Reuben. By efp's, I take it you mean the command structure for Ethernet service instance, bride domain, etc. right ?
Aaron -----Original Message----- From: Reuben Farrelly [mailto:[email protected]] Sent: Wednesday, August 08, 2012 3:51 PM To: Aaron Cc: [email protected] Subject: Re: [c-nsp] me3600 svi's not showing in and out bit counts that i see on corresponding phy int It seems to be an architecture thing - this has been the case across all of the code drops on this platform so far to date. I suspect only process switched data is counted in those interfaces. You'll need to poll EFP's on these switches instead of VLAN interfaces for measuring data flows - those are per-service+per-port and the SNMP counters on those do get populated. And if you're not yet using EFP's then you're probably not using these switches to their full potential :-) Reuben On 8/08/2012 11:54 PM, Aaron wrote: > anybody know why me3600 svi doesn't seem to show in and out bit counts > that the underlying phy int shows? ....all svi's (10,11,13) are in a > vrf running over mpls l3vpn _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
