SVI counters are currently not supported on ME3800X/ME3600X. You can use " show vlan counters", EVC MIB supported in 15.2(4)S or the following commands in pre 15.2(4)S release ->snmpwalk -v 2c 7.23.35.39 public .1.3.6.1.2.1.2.2.1.2 | grep 23575 interfaces.ifTable.ifEntry.ifDescr.23575 = TenGigabitEthernet0/2.ServiceInstance.2 ->snmpwalk -v 2c 7.23.35.39 public .1.3.6.1.2.1.2.2.1.10 | grep 23575 interfaces.ifTable.ifEntry.ifInOctets.23575 = Counter32: 2812549746 ->snmpwalk -v 2c 7.23.35.39 public .1.3.6.1.2.1.2.2.1.11 |grep 23575 interfaces.ifTable.ifEntry.ifInUcastPkts.23575 = Counter32: 166256930
Regards, Waris -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Reuben Farrelly Sent: Thursday, August 09, 2012 7:23 PM To: Andrew K. Cc: [email protected] Subject: Re: [c-nsp] me3600 svi's not showing in and out bit counts that i see on corresponding phy int 15.2(2)S2 released today for this platform has this as a "Fixed" defect: CSCtw79488 Symptoms: Multicast is not forwarded out on EVC. Conditions: This has been observed with Cisco IOS Release 15.1(2)EY and EY1a and with the following configuration: So you may be in luck. Reuben On 10/08/2012 12:25 AM, Andrew K. wrote: > Would be great if multicast worked corrected through the efp. > > On 8/9/2012 10:19 AM, Aaron wrote: >> Thanks Reuben. By efp's, I take it you mean the command structure >> for Ethernet service instance, bride domain, etc. right ? _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
