Hi Waris,
I had come across that bug referring to EPC in "Release Notes for the
Cisco ME 3800X and ME 3600X Switch" -
http://www.cisco.com/en/US/docs/switches/metro/me3600x_3800x/software/release/15.1_2_ey/release/notes/ol25360.html
and had hoped that the feature was available. I wasn't able to find any
other documentation thus my question to the list.
What I am really looking for is a possible way to verify any seen mac
addresses on a customer EVC xconnect when running MPLS to the edge for
troubleshooting. This was quite easy and useful with a switched access
layer. I don't really want to xconnect on vlans and bridge to EVCs (not
sure that is possible on the ME3600X platform)
Thanks
Ivan
On 10/Aug/2012 8:09 p.m., Waris Sagheer (waris) wrote:
Ivan,
Which packet capture you are referring to on ME3600X?
There is no support of embedded packet capture on ME3600X.
Regards,
Waris
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Ivan
Sent: Thursday, August 09, 2012 10:35 PM
To: [email protected]
Subject: [c-nsp] ME3600X Embedded Packet Capture
Hi,
Has anyone used Embedded Packet Capture on the ME3600X successfully? If so are
their any gotchas to be weary of?
The only things that come up when I search for this is CSCtq11526 Embedded
Packet Capture stops BFD neighbor adjacency, but have been unable to find
details of what packets can be captured - hardware v cpu etc. Any
documentation pointers would be appreciated.
Thanks
Ivan
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
