Hi,
On 11 August 2012 10:32, Ivan <[email protected]> wrote: {cut} > xconnect 1.2.3.4 666 encapsulation mpls Speaking from general experience - this is the culprit. In point-to-point L2VPNs there is (usually, I admit I'm not sure if that's the case on 3600x) no MAC address learning (which nicely conserves the resources on the switch). If you really need to see that address - you should turn that into a point-to-point VPLS. kind regards Pshem _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
