Hi guys, Has anyone managed to get IOS to serve statically defined AAAA records? I do this just fine with A records as such :
ip dns server ip host ns.example.com 1.1.1.1 ip host somehost.example.com 1.1.1.2 ip dns primary example.org soa ns.example.org [email protected] 21600 900 7776000 86400 Interestingly whenever I add a static ipv6 entry, I get the SOA as an answer instead of the actual AAAA record. But from the router itself, it can use the statically defined hosts just fine. ipv6 host somehost.example.com 2001:1:1:1::1 router#ping ipv6 somehost.example.com Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 2001:1:1:1::1, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 0/1/4 ms I'm running 15.2-2(T1) on a 891W. Thanks, Eric Lauriault _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
