What is the flex links about? Because the traffic load-balance or not is depend on your settings, by default is source mac address, let's say if you just have one source then the traffic will just use one port-channel link, if you have two sources, then should be load-balance between the two members. Correct me if I have the wrong understanding of hashing algorithm.
Thanks and regards, Xu Hu On 24 Aug, 2012, at 7:02, Ryan West <[email protected]> wrote: > Flex links is an option as well. > > Sent from handheld > > On Aug 23, 2012, at 5:45 PM, "Andrew Miehs" <[email protected]> wrote: > >> You could shut the one of the links down but if you really want to do this, >> why use a port channel at all - spanning tree can do what you are after... >> >> Sent from a mobile device >> >> On 24/08/2012, at 3:08, Harry Hambi <[email protected]> wrote: >> >>> Hi all, >>> In a port channel can you force traffic down a particular link, don't >>> use the hashing algorithm. >> >> _______________________________________________ >> cisco-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
