Hi Ryan, thanks for your information. Xu Hu
On 24 Aug, 2012, at 20:19, Ryan West <[email protected]> wrote: > On Fri, Aug 24, 2012 at 06:40:07, Xu Hu wrote: >> Subject: Re: [c-nsp] Port channel >> >> What is the flex links about? >> Because the traffic load-balance or not is depend on your settings, by >> default is source mac address, let's say if you just have one source >> then the traffic will just use one port-channel link, if you have two >> sources, then should be load-balance between the two members. >> Correct me if I have the wrong understanding of hashing algorithm. >> > > The default hashing algorithm is different on some platforms in the Catalyst > line. In the Nexus line, the default is different for a layer 3 port channel > vs a layer 2. Flex Links disable STP and one interface or Portchannel acts > as a backup. > > http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/configuration/guide/flexlink.html > > -ryan _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
