Hi Experts, My question is on SDR present in the Cisco IOS-XR device
As you all aware of logging into any module (FWSM, WISM ) present inside Cat65K(Chassis device) using the following command. "session slot <slot num> processor 1" With this command , User can able to login into module with its credentials. and can get the 'show version' and 'show run' command outputs of the module. Similarly is there any command to login into non-owner (named) sdr from owner sdr (IOS XR device) If there is no command on IOS-XR device , then how can we get the outputs of SDR 'show version' , 'show run' etc..(Assume SDR is configured without ip address) Any possible solutions to this above scenario ? Thanks, Sai Kishore. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
