Log in to the non-owner SDR using admin plane authentication: Username:xxxx@admin Password:xxxx Example: Username:xxxx@admin Password:xxxx http://www.cisco.com/en/US/docs/ios_xr_sw/iosxr_r3.7/system_management/configuration/guide/yc37sdr.html
Thanks and regards, Xu Hu On 27 Aug, 2012, at 1:21, Sai Kishore <[email protected]> wrote: > Hi Experts, > > My question is on SDR present in the Cisco IOS-XR device > > As you all aware of logging into any module (FWSM, WISM ) present inside > Cat65K(Chassis device) using the following command. > "session slot <slot num> processor 1" > > With this command , User can able to login into module with its credentials. > and can get the 'show version' and 'show run' command outputs of the module. > > Similarly is there any command to login into non-owner (named) sdr from > owner sdr (IOS XR device) > > If there is no command on IOS-XR device , then how can we get the outputs > of SDR 'show version' , 'show run' etc..(Assume SDR is configured without > ip address) > > Any possible solutions to this above scenario ? > > Thanks, > Sai Kishore. > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
