This is a change requiring telco involvement, which means 30-60 days. So not feasible at the moment.
But I think more to the point, I have the same problems on the T1s that come in as DS3 channels. And the pa-mc-t3 counters are almost perfectly clean. I can post the results if it would be helpful. Sincerely, Michael Malitsky > ------------------------------ > > Message: 5 > Date: Thu, 30 Aug 2012 12:53:22 -0600 > From: Tim Densmore <[email protected]> > To: [email protected] > Subject: Re: [c-nsp] 7200 Line protocol bouncing > Message-ID: <[email protected]> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > On 8/30/2012 11:49 AM, Michael Malitsky wrote: > > This is a > > 7206VXR, with a PA-MC-T3 and a PA-MC-4T1 cards. > Is there a reason you have to run these T1s to the 4T1 card? The > pa-mc-t3 gives very good 24 hour PMs (show controllers t3 n/n/n > tabular), and the 4T1 does not (as far as I know at least- show > service-module isn't an option I see, and show serial gives nothing that > looks useful w/o a decoder ring). If your circuits are dirty or taking > lots of slips, etc, you'd be able to see it easily on that card. > > -TD _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
