On Sep 11, 2012, at 11:34 PM, root net <[email protected]> wrote: > I've also been reading that we would want > Engine 3 as you mention but I think Engine 2 would work too. What do you > think?
If you have any aspirations to move to XR across the board, engine 0 and 3 are supported. Assuming 12.0S has what you need feature wise, then those will work. Be advised there are some sore spots with control plane access control on various e2/4/+ as many of these designs existed for "time to market" purposes, not "implements all the things correctly." I echo others in suggesting asr1001 or perhaps the asr9001, if you need 10g. 7201 might also handle your needs, too. Lastly, a used 6503 + 7203bxl + some leftover 6548-g-tx or 6516a-gbic runs about 8k, or so eBay tells me. Classic bus 16 port gbic blade would even do you line-rate, all ports, too. SX train has you covered for "features" and this actually has some years of support left, minimally many more than GSR. -Tk _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
