Saku, thank you for reply! According to /var/log/messages and kernel ring buffer, eth0 enters to promiscuous mode:
Oct 2 02:55:39 PE860 kernel: [7745928.328025] device eth0 entered promiscuous mode Oct 2 02:55:43 PE860 kernel: [7745931.459236] device eth0 left promiscuous mode In addition, if I clear counters on "WS-C3560G-24TS" port Gi0/11 and wait few seconds I can see see that "packets output" counter of port Gi0/11(line protocol is down (monitoring)) increased by 11 packets and at the same time I received 11 IPv6 packets(dhcp6 solicit, ICMP6 router advertisement, ICMP6 neighbor solicitation) in "PE860". "ifconfig eth0" in "PE860" confirmed, that indeed only 11 "RX packets" were received. With few seconds I should see dozens of packets captured because VLAN 694 has >1Mbps traffic. Any other ideas? thanks, Martin 2012/10/2 Saku Ytti <[email protected]>: > On (2012-10-02 03:02 +0300), Martin T wrote: > >> 1) First setup: http://i.imgur.com/XFCD8.png >> traffic captured in "PE860" machine- only STP frames show up. VLAN 15 > >> 2) Second setup: http://i.imgur.com/a3KjV.png >> "PE860" sees only IPv6 traffic! Am I doing something wrong or is this > > My first guess is PE860 is not in promiscuous mode and will only see > broadcast/multicast. > Do the switch counters agree that production traffic is not sent out? > > -- > ++ytti > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
