Hitesh, how does your virtual-access look like for the spokes? Can you please share the "show run interface virtual-access xx" for the spokes?
Tnx Arie From: Hitesh Vinzoda [mailto:[email protected]] Sent: Tuesday, October 09, 2012 09:05 To: Arie Vayner (avayner) Cc: Cisco Mailing list Subject: Re: [c-nsp] Half duplex VRF Hi Arie, I have attached topology, .Net file and configs of related devices. R8 and R9 are simulating spokes whereas Internet-RTR is simulating Hub. Cheers Hitesh On Tue, Oct 9, 2012 at 8:37 PM, Arie Vayner (avayner) <[email protected]<mailto:[email protected]>> wrote: Hitesh, can you maybe share some of your configs? Arie -----Original Message----- From: [email protected]<mailto:[email protected]> [mailto:[email protected]<mailto:[email protected]>] On Behalf Of Hitesh Vinzoda Sent: Tuesday, October 09, 2012 07:04 To: Cisco Mailing list Subject: [c-nsp] Half duplex VRF I am trying to setup half duplex vrf to save vrf's on the LNS. Does anyone has working configuration for spokes and Hub connected on the same PE router i.e. LNS. So far i able to export-import the routes but the traces from one spoke to other goes directly via LNS instead of via Hub. Please advise. TIA Hitesh _______________________________________________ cisco-nsp mailing list [email protected]<mailto:[email protected]> https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
