Anyone have any experience with running WCCPv2 on a Cisco 3825? The router will have two gig-e intertfaces, one will have a dozen or so sub-interfaces, traffic routing from one physical interface to the other. No routing protocols, no NAT, no IPSec, etc... just a simple router with WCCP v2 enabled.
I'm probably looking at average utilization somewhere around 50 Mbps, with intermittent short lived spikes up to ~90 Mbps. Probably less then half that traffic would be subjected to WCCP redirection, HTTP only. My only experience with WCCP has been on the 6500 platform with sup720-3b's sending to some BlueCoat boxes and that's been running well, just wasn't sure if there was anything to be concerned about with the level of traffic noted above on a 3825. Any feedback is appreciated. Thanks, --NZR _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
