OSPFv3 PE-CE is supported starting with IOS 15.2(2)S. The feature name
is "OSPFv3 VRF-Lite/PE-CE".
Note that you need to use the new form of the OSPFv3 CLI. For example:
interface f0/0
vrf forwarding red
ipv6 address 2001:db8:1::1/64
ospfv3 1 ipv6 area 0
interface f1/0
vrf forwarding blue
ipv6 address 2001:db8:2::1/64
ospfv3 1 ipv6 area 1
router ospfv3 1
router-id 1.1.1.1
!
address-family ipv6 vrf red
redistribute bgp 65000
exit-address-family
!
address-family ipv6 vrf blue
redistribute bgp 65000
exit-address-family
Also "show ospfv3 vrf red ..." etc.
Regards,
Paul
On 10/17/2012 09:11 AM, Mohammad Khalil wrote:
Hi all,
I was trying to implement OSPFv3 and EIGRP6 as the PE-CE in 6VPE deployment but
seems IOS does not support that yet
Was there any updates in regards?
Thanks
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
