Use an export map within the VRF:
1. Build an ACL to match the subnet to be leaked.
2. Create a route-map.
Match the acl
Set the extcommunity rt to an rt that vrf2 is set to import.
3. Within the VRF config, associate the route-map with an export map.
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Aaron
Sent: Thursday, November 01, 2012 2:29 PM
To: [email protected]
Subject: [c-nsp] leaking only a couple routes between 2 vrf's
What is a clean/easy way to leak a couple routes between two vrf's ? if you
have links to docs or sites that explain this or you know how , lemme know
please.
Aaron
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
