Handy! Is there an IOS-XR equivalent to this?
On 2012-11-02, at 12:51 PM, Paul Wells <[email protected]> wrote: > Hi Aaron, > > If you have a recent IOS release you can use the "route-replicate" command to > do this directly without requiring BGP. For example: > > vrf definition blue > ! > address-family ipv4 > route-replicate from vrf red unicast all route-map red2blue > exit-address-family > ! > vrf definition red > ! > address-family ipv4 > exit-address-family > ! > ip prefix-list red2blue seq 5 permit 90.0.0.0/8 le 32 > ip prefix-list red2blue seq 10 permit 91.0.0.0/8 le 32 > ! > route-map red2blue permit 10 > match ip address prefix-list red2blue > ! > > R1#sh ip ro vrf red > > Routing Table: red > Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP > ... > + - replicated route, % - next hop override > > Gateway of last resort is not set > > 10.0.0.0/8 is variably subnetted, 2 subnets, 2 masks > C 10.1.0.0/24 is directly connected, Ethernet0/0 > L 10.1.0.180/32 is directly connected, Ethernet0/0 > 90.0.0.0/24 is subnetted, 2 subnets > O 90.1.0.0 [110/11] via 10.1.0.181, 00:30:26, Ethernet0/0 > i L1 90.2.0.0 [115/20] via 10.1.0.181, 00:00:05, Ethernet0/0 > 91.0.0.0/24 is subnetted, 1 subnets > O 91.1.0.0 [110/11] via 10.1.0.181, 00:30:16, Ethernet0/0 > 92.0.0.0/24 is subnetted, 1 subnets > O 92.1.0.0 [110/11] via 10.1.0.181, 00:30:16, Ethernet0/0 > > R1#sh ip ro vrf blue > > Routing Table: blue > Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP > ... > + - replicated route, % - next hop override > > Gateway of last resort is not set > > 90.0.0.0/24 is subnetted, 2 subnets > O + 90.1.0.0 [110/11] via 10.1.0.181 (red), 00:30:38, Ethernet0/0 > i L1+ 90.2.0.0 [115/20] via 10.1.0.181 (red), 00:00:17, Ethernet0/0 > 91.0.0.0/24 is subnetted, 1 subnets > O + 91.1.0.0 [110/11] via 10.1.0.181 (red), 00:30:28, Ethernet0/0 > > > This is documented as part of the "Easy Virtual Network" feature, but can be > used by itself. See, for example: > > http://www.cisco.com/en/US/docs/ios-xml/ios/evn/configuration/xe-3s/Configuring_Easy_Virtual_Network_Shared_Services.html > > Regards, > Paul > > On 11/01/2012 04:28 PM, Aaron wrote: >> What is a clean/easy way to leak a couple routes between two vrf's ? if you >> have links to docs or sites that explain this or you know how , lemme know >> please. >> >> Aaron >> >> _______________________________________________ >> cisco-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ >> > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
