Hi allI was trying to configure BFD with OSPF
I have the below configuration R1#sh run int f0/0.519Building configuration... Current configuration : 112 bytes!interface FastEthernet0/0.519 encapsulation dot1Q 519 ip address 20.5.19.19 255.255.255.0 ip ospf bfdend R5#sh run int f0/0.519Building configuration... Current configuration : 111 bytes!interface FastEthernet0/0.519 encapsulation dot1Q 519 ip address 20.5.19.5 255.255.255.0 ip ospf bfdend R5#sh ip ospf neighbor | inc 51919.19.19.19 1 FULL/DR 00:00:39 20.5.19.19 FastEthernet0/0.519 I have no bfd neighbors R5#sh bfd neighbors R5# As well , am using GNS3 , when i tried to modify the BFD timers , The routers stuck with no responseinterface FastEthernet0/0.519ip ospf bfdbfd interval 250 min_rx 250 multiplier 3 Any ideas?Thanks _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
