Thanks for the replies guys From: [email protected] Date: Tue, 6 Nov 2012 09:58:29 -0600 Subject: Re: [c-nsp] Cisco BFD To: [email protected] CC: [email protected]; [email protected]
BFD is not supported in dynamips last I looked. -Blake On Tue, Nov 6, 2012 at 9:50 AM, Adam Vitkovsky <[email protected]> wrote: I came to conclusion that bfd doesn't work in dynamips it will always crash adam -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of M K Sent: Tuesday, November 06, 2012 2:43 PM To: [email protected] Subject: [c-nsp] Cisco BFD Hi allI was trying to configure BFD with OSPF I have the below configuration R1#sh run int f0/0.519Building configuration... Current configuration : 112 bytes!interface FastEthernet0/0.519 encapsulation dot1Q 519 ip address 20.5.19.19 255.255.255.0 ip ospf bfdend R5#sh run int f0/0.519Building configuration... Current configuration : 111 bytes!interface FastEthernet0/0.519 encapsulation dot1Q 519 ip address 20.5.19.5 255.255.255.0 ip ospf bfdend R5#sh ip ospf neighbor | inc 51919.19.19.19 1 FULL/DR 00:00:39 20.5.19.19 FastEthernet0/0.519 I have no bfd neighbors R5#sh bfd neighbors R5# As well , am using GNS3 , when i tried to modify the BFD timers , The routers stuck with no responseinterface FastEthernet0/0.519ip ospf bfdbfd interval 250 min_rx 250 multiplier 3 Any ideas?Thanks _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
