Hey guys,
We are having issues monitoring our 3750x power supplies via the cisco envmon MIB that hopefully someone out there has experienced. When one of the power supplies loses power the OID will change state to 6:notFunctioning but once power is reset the state does not change back to normal. This is causing issues for our monitoring application. See below for the OID: Object ciscoEnvMonSupplyState OID 1.3.6.1.4.1.9.9.13.1.5.1.3 Type CiscoEnvMonState 1:normal 2:warning 3:critical 4:shutdown 5:notPresent 6:notFunctioning Permission read-only Status current MIB Description The current state of the power supply being instrumented. snmpwalk result: SNMPv2-SMI::enterprises.9.9.13.1.5.1.3.1058 = INTEGER: 1 SNMPv2-SMI::enterprises.9.9.13.1.5.1.3.1086 = INTEGER: 6 switch#show env power SW PID Serial# Status Sys Pwr PoE Pwr Watts --- ------------------ ---------- --------------- ------- ------- ----- 1A C3KX-PWR-1100WAC xxxx OK Good Good 1100/0 1B C3KX-PWR-1100WAC xxxx OK Good Good 1100/0 Any ideas? I believe a reload of the switch will resolve but we can't do this for every switch that loses power to one of the supplies. Thanks, Aaron. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
