--- On Wed, 12/12/12, Dobbins, Roland <[email protected]> wrote: > From: Dobbins, Roland <[email protected]> > Subject: Re: [c-nsp] Cisco command to see active session on "cisco WS-C6503-E > (R7000)" > To: "cisco-nsp NSP" <[email protected]> > Date: Wednesday, December 12, 2012, 8:35 PM > > On Dec 13, 2012, at 9:40 AM, Andrew Jones wrote: > > > You need netflow enabled on the switch, then enable "ip > flow ingress" and "ip flow egress" on the interface > you are interested in, then perform a "show ip cache flow" > > In addition to all the caveats which render pre-Sup2T/DFC4 > NetFlow on 6500 extremely problematic, one ought never under > any circumstances to enable both ip flow ingress and ip flow > egress on the same interface. > > Instead, use one or the other. But not both. > +1 there! (Perhaps beat-up Cisco; ask for a *note* saying "while both are possible, *doing-both* *is-not-recommended* for reasons *obvious and not-so-obvious* ./Randy
_______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
