Got a used 7206 I am trying to bring back to life. It seems to be able to read the PCMCIA card in the slot okay, but after a power cycle it loses config and claims the NVRAM is corrupt, throwing me to rommon. From there I can tell it to boot from disk0 and it boots alright from the PCMCIA card into the default config. Needless to say, any config I have entered gets lost. Which NVRAM is it referring to? The 4 meg on the motherboard? Is there anyway to clear and reset that, or does it just need to be replaced?
Warning: monitor nvram area is corrupt ... using default values C7200 platform with 131072 Kbytes of main memory [after a power cycle....] System Bootstrap, Version 12.2(4r)B, RELEASE SOFTWARE (fc1) TAC Support: http://www.cisco.com/tac Copyright (c) 2002 by cisco Systems, Inc. Warning: monitor nvram area is corrupt ... using default values C7200 platform with 131072 Kbytes of main memory rommon 1 > boot disk0 Self decompressing the image : #################################################################################################################################################################################################################################################################################################################################################### [OK] [... and so on into the default config...] _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
