On 12/26/2012 2:09 PM, Joseph Mays wrote:
Got a used 7206 I am trying to bring back to life. It seems to be able to read
the PCMCIA card in the slot okay, but after a power cycle it loses config and
claims the NVRAM is corrupt, throwing me to rommon. From there I can tell it to
boot from disk0 and it boots alright from the PCMCIA card into the default
config. Needless to say, any config I have entered gets lost. Which NVRAM is it
referring to? The 4 meg on the motherboard? Is there anyway to clear and reset
that, or does it just need to be replaced?
Warning: monitor nvram area is corrupt ... using default values
C7200 platform with 131072 Kbytes of main memory
I had a couple that did that and I was able to fix one of them by
replacing the battery on the I/O card.
--
Jerry Bacon
Senior Network Engineer
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
