So the customer's DSL modem is doing routing rather than bridging - any chance it's also providing some kind of stateful firewall behavior? Wondering if it could be timing out/closing the session passing through it. If the DSL modem has stateful packet inspection, perhaps it can be turned off.
Regardless, packet captures are your friend. Run a capture on the client ASA and get a mirrored capture on the RA gateway ASA, load them both up side by side in Wireshark, and see what is happening to your session. http://www.cisco.com/en/US/products/ps6120/products_tech_note09186a0080a9edd6.shtml On Fri, Dec 28, 2012 at 4:53 PM, Alan Buxey <[email protected]> wrote: > Given that same setup elsewhere is working then this problem is local. The > world isn't ideal. I would suggest its an L1 or L2 issue with this > customers line or broadband modem. Maybe line issues and renegotiation of > the link or faulty modem. Get the line checked/measured/conditioned and/or > the modem swapped out. > > alan > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
