Hi I have a Cisco 7301 with IOS: (C7301-ADVENTERPRISEK9-M), Version 12.4(15)T1
This cisco is connected to my supplier: interface Port-channel1 no ip address interface GigabitEthernet0/1 mtu 1600 no ip address duplex auto speed auto media-type gbic negotiation auto channel-group 1 On this link, we receive a Vlan: 850 I want sent by EoMPLS this Vlan to a another router, on other router, without LAG, i use a traditional interface GigabitEthernet0/1.850 encapsulation dot1q 850 no cdp enable xconnect xxxxxxxx But on LAG i don't know the process. if i create a: interface GigabitEthernet0/1.850 channel-group 1 no cdp enable i have a error: 7301(config-subif)#encapsulation dot1Q 850 GigabitEthernet0/1 is a member of Port-Channel-1. The intended configuration is not allowed. and i don't have xconnect command if i create a : interface Port-channel1.850 encapsulation dot1Q 850 it's good for Vlan but i don't have a xconnect commande on port-channel what is the solution ? best regards Jerome ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
