nexus 7k with sup-1 5.2
How can I tell which MATCH statement within a CLASS-MAP is causing CoPP drops
shown in example below?
Here are the two I am concerned with. The CoPP stats were cleared 10 min prior
to this output.
----------------------
class-map copp-system-class-normal (match-any)
match access-group name copp-system-acl-dhcp
match access-group name copp-system-acl-mac-dot1x
match redirect dhcp-snoop
match protocol arp
set cos 1
police cir 680 kbps , bc 250 ms
module 1 :
conformed 4741991 bytes; action: transmit
violated 235956 bytes; action: drop
class-map copp-system-class-l2-default (match-any)
match access-group name copp-system-acl-mac-undesirable
match protocol mpls
police cir 100 kbps , bc 250 ms
module 1 :
conformed 1038344 bytes; action: transmit
violated 1333130 bytes; action: drop
----------------------
Thanks for any help;
Jeff Fitzwater
OIT Network Systems
Princeton University
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
