Hi, Sorry , this is my first thread . Plateform is 6509 , IOS is SXI8
Br. Kayssar -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of ext Phil Mayers Sent: Tuesday, January 08, 2013 12:11 PM To: [email protected] Subject: Re: [c-nsp] VACL and SPAN load share on destination ports On 08/01/13 08:49, Ben Hammadi, Kayssar (NSN - TN/Tunis) wrote: > Dears , > > Below the configuration for SPAN and VACL : Don't hijack an existing thread; start a new one. > load balancing is needed between Gi9/24 and Gi9/46 by VACL , and > needed between Gi1/43 and Gi9/23 by SPAN. I tried to group Gi9/24 and > Gi9/46 into a port channel but "switchport capture" was not supported > under a Po, I tried also to load balance manually by "switchport > capture allowed vlan ..." but I start to have one way traffic and lot > of missing packet : Platform and IOS version? _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
