the command is "show mrib route rate". I've forgot to add "rate" to the end
tp# show mfib route rate 233.88.168.176 IP Multicast Forwarding Rates Source Address, Group Address HW Forwarding Rates: bps In/pps In/bps Out/pps Out (x.x.x.x 233.88.168.176) bps_in /pps_in /bps_out /pps_out 1898751 / 175 / N/A / N/A 2013/1/12 John Neiberger <[email protected]> > I do recall opening a TAC case on something like this about a year ago. We > also were not seeing rates in our multicast traffic. As I recall, they said > it was a bug, but I don't have any details. I'll see if I can find the case > notes. We were running 4.0.1 at the time. > > > On Fri, Jan 11, 2013 at 12:03 PM, Aaron <[email protected]> wrote: > >> I think I enabled that too on my asr9k's and recall not seeing any rates >> either. Wondering if there is a known issue with this. Anyone know >> anything about that ? >> >> Aaron >> >> -----Original Message----- >> From: [email protected] [mailto: >> [email protected]] On Behalf Of Erçin TORUN >> Sent: Friday, January 11, 2013 12:07 PM >> To: Adam Vitkovsky >> Cc: [email protected] >> Subject: Re: [c-nsp] show command for active multicast kbps rate >> >> Hi again, >> >> I've enabled the "rate-per-route" command but still cant see the per flow >> rates. Have any idea ? I'm sure that there is a flow cause i'm watching it >> and it passes throughout the backbone. >> >> >> #show mfib route 233.88.168.176 detail >> >> >> IP Multicast Forwarding Information Base Entry flags: C - >> Directly-Connected Check, S - Signal, D - Drop, >> IA - Inherit Accept, IF - Inherit From, MA - MDT Address, >> ME - MDT Encap, MD - MDT Decap, MT - MDT Threshold Crossed, >> MH - MDT interface handle, CD - Conditional Decap, >> DT - MDT Decap True, EX - Extranet >> MoFE - MoFRR Enabled, MoFS - MoFRR State Interface flags: F - Forward, >> A - Accept, IC - Internal Copy, >> NS - Negate Signal, DP - Don't Preserve, SP - Signal Present, >> EG - Egress, EI - Encapsulation Interface, MI - MDT Interface, >> EX - Extranet, A2 - Secondary Accept >> Forwarding/Replication Counts: Packets in/Packets out/Bytes out Failure >> Counts: RPF / TTL / Empty Olist / Encap RL / Other >> >> (x.x.x.x,233.88.168.176), Flags: >> Up: 00:02:02 >> Last Used: never >> SW Forwarding Counts: 0/0/0 >> SW Replication Counts: 0/0/0 >> SW Failure Counts: 0/0/0/0/0 >> Route ver: 0x2f34 >> MVPN Info :- >> MDT Handle: 0x0, MDT Probe:N [N], Rate:Y, Acc:N >> MDT SW Ingress Encap V4/V6, Egress decap: 0 / 0, 0 >> Encap ID: 0 RPF ID: 0 >> Local Receiver: True Turnaround: False >> TenGigE0/0/0/0 Flags: NS, Up:00:02:02 >> GigabitEthernet0/1/0/4.112 Flags: A, Up:00:02:02 >> >> #show mrib route 233.88.168.176 detail >> >> >> IP Multicast Routing Information Base >> Entry flags: L - Domain-Local Source, E - External Source to the Domain, >> C - Directly-Connected Check, S - Signal, IA - Inherit Accept, >> IF - Inherit From, D - Drop, MA - MDT Address, ME - MDT Encap, >> MD - MDT Decap, MT - MDT Threshold Crossed, MH - MDT interface handle >> CD - Conditional Decap, MPLS - MPLS Decap, MF - MPLS Encap, EX - >> Extranet >> MoFE - MoFRR Enabled, MoFS - MoFRR State Interface flags: F - >> Forward, A - Accept, IC - Internal Copy, >> NS - Negate Signal, DP - Don't Preserve, SP - Signal Present, >> II - Internal Interest, ID - Internal Disinterest, LI - Local >> Interest, >> LD - Local Disinterest, DI - Decapsulation Interface >> EI - Encapsulation Interface, MI - MDT Interface, LVIF - MPLS Encap, >> EX - Extranet, A2 - Secondary Accept >> >> (x.x.x.x ,233.88.168.176) Ver: 0x2f34 RPF nbr: x.x.x.x Flags:, FMA: >> 0x501bfba0 FGID: 0x4 MGID: 0x9a2c >> Up: 00:02:19 >> Incoming Interface List >> GigabitEthernet0/1/0/4.112 Flags: A, Up: 00:02:19 >> Outgoing Interface List >> TenGigE0/0/0/0 Flags: F NS, Up: 00:02:19 >> >> # show ip route x.x.x.x >> Fri Jan 11 20:00:24.076 Turkiye >> >> Routing entry for x.x.x.x/28 >> Known via "connected", distance 0, metric 0 (connected) >> Installed Dec 20 00:12:02.128 for 3w1d >> Routing Descriptor Blocks >> directly connected, via GigabitEthernet0/1/0/4.112 >> Route metric is 0 >> Redist Advertisers: >> ospf 1 >> >> nsf >> multipath hash source-nexthop >> ssm range abcde >> rate-per-route >> ssm allow-override >> >> >> 2013/1/8 Erçin TORUN <[email protected]> >> >> > Hi Adam, >> > >> > Thanks for quick response. I used the "sh mrib route" before but >> > without "rate-per-route" config, will check asap. >> > >> > 2013/1/8 Adam Vitkovsky <[email protected]> >> > >> >> In XR its sh mrib route/sh mfib route but in order to get the bw rate >> >> you have to have the following cmd enabled: >> >> >> >> multicast-routing >> >> rate-per-route >> >> >> >> adam >> >> >> >> >> > >> > >> > -- >> > ERCIN TORUN >> >> >> >> >> -- >> ERCIN TORUN >> _______________________________________________ >> cisco-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ >> >> >> _______________________________________________ >> cisco-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ >> > > -- ERCIN TORUN _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
