Sh mfib route rate
Thanks! Aaron From: Erçin TORUN [mailto:ercinto...@gmail.com] Sent: Monday, January 14, 2013 6:18 AM To: John Neiberger Cc: Aaron; Adam Vitkovsky; cisco-nsp@puck.nether.net Subject: Re: [c-nsp] show command for active multicast kbps rate the command is "show mrib route rate". I've forgot to add "rate" to the end tp# show mfib route rate 233.88.168.176 IP Multicast Forwarding Rates Source Address, Group Address HW Forwarding Rates: bps In/pps In/bps Out/pps Out (x.x.x.x 233.88.168.176) bps_in /pps_in /bps_out /pps_out 1898751 / 175 / N/A / N/A 2013/1/12 John Neiberger <jneiber...@gmail.com> I do recall opening a TAC case on something like this about a year ago. We also were not seeing rates in our multicast traffic. As I recall, they said it was a bug, but I don't have any details. I'll see if I can find the case notes. We were running 4.0.1 at the time. On Fri, Jan 11, 2013 at 12:03 PM, Aaron <aar...@gvtc.com> wrote: I think I enabled that too on my asr9k's and recall not seeing any rates either. Wondering if there is a known issue with this. Anyone know anything about that ? Aaron -----Original Message----- From: cisco-nsp-boun...@puck.nether.net [mailto:cisco-nsp-boun...@puck.nether.net] On Behalf Of Erçin TORUN Sent: Friday, January 11, 2013 12:07 PM To: Adam Vitkovsky Cc: cisco-nsp@puck.nether.net Subject: Re: [c-nsp] show command for active multicast kbps rate Hi again, I've enabled the "rate-per-route" command but still cant see the per flow rates. Have any idea ? I'm sure that there is a flow cause i'm watching it and it passes throughout the backbone. #show mfib route 233.88.168.176 detail IP Multicast Forwarding Information Base Entry flags: C - Directly-Connected Check, S - Signal, D - Drop, IA - Inherit Accept, IF - Inherit From, MA - MDT Address, ME - MDT Encap, MD - MDT Decap, MT - MDT Threshold Crossed, MH - MDT interface handle, CD - Conditional Decap, DT - MDT Decap True, EX - Extranet MoFE - MoFRR Enabled, MoFS - MoFRR State Interface flags: F - Forward, A - Accept, IC - Internal Copy, NS - Negate Signal, DP - Don't Preserve, SP - Signal Present, EG - Egress, EI - Encapsulation Interface, MI - MDT Interface, EX - Extranet, A2 - Secondary Accept Forwarding/Replication Counts: Packets in/Packets out/Bytes out Failure Counts: RPF / TTL / Empty Olist / Encap RL / Other (x.x.x.x,233.88.168.176), Flags: Up: 00:02:02 Last Used: never SW Forwarding Counts: 0/0/0 SW Replication Counts: 0/0/0 SW Failure Counts: 0/0/0/0/0 Route ver: 0x2f34 MVPN Info :- MDT Handle: 0x0, MDT Probe:N [N], Rate:Y, Acc:N MDT SW Ingress Encap V4/V6, Egress decap: 0 / 0, 0 Encap ID: 0 RPF ID: 0 Local Receiver: True Turnaround: False TenGigE0/0/0/0 Flags: NS, Up:00:02:02 GigabitEthernet0/1/0/4.112 Flags: A, Up:00:02:02 #show mrib route 233.88.168.176 detail IP Multicast Routing Information Base Entry flags: L - Domain-Local Source, E - External Source to the Domain, C - Directly-Connected Check, S - Signal, IA - Inherit Accept, IF - Inherit From, D - Drop, MA - MDT Address, ME - MDT Encap, MD - MDT Decap, MT - MDT Threshold Crossed, MH - MDT interface handle CD - Conditional Decap, MPLS - MPLS Decap, MF - MPLS Encap, EX - Extranet MoFE - MoFRR Enabled, MoFS - MoFRR State Interface flags: F - Forward, A - Accept, IC - Internal Copy, NS - Negate Signal, DP - Don't Preserve, SP - Signal Present, II - Internal Interest, ID - Internal Disinterest, LI - Local Interest, LD - Local Disinterest, DI - Decapsulation Interface EI - Encapsulation Interface, MI - MDT Interface, LVIF - MPLS Encap, EX - Extranet, A2 - Secondary Accept (x.x.x.x ,233.88.168.176) Ver: 0x2f34 RPF nbr: x.x.x.x Flags:, FMA: 0x501bfba0 FGID: 0x4 MGID: 0x9a2c Up: 00:02:19 Incoming Interface List GigabitEthernet0/1/0/4.112 Flags: A, Up: 00:02:19 Outgoing Interface List TenGigE0/0/0/0 Flags: F NS, Up: 00:02:19 # show ip route x.x.x.x Fri Jan 11 20:00:24.076 Turkiye Routing entry for x.x.x.x/28 Known via "connected", distance 0, metric 0 (connected) Installed Dec 20 00:12:02.128 for 3w1d Routing Descriptor Blocks directly connected, via GigabitEthernet0/1/0/4.112 Route metric is 0 Redist Advertisers: ospf 1 nsf multipath hash source-nexthop ssm range abcde rate-per-route ssm allow-override 2013/1/8 Erçin TORUN <ercinto...@gmail.com> > Hi Adam, > > Thanks for quick response. I used the "sh mrib route" before but > without "rate-per-route" config, will check asap. > > 2013/1/8 Adam Vitkovsky <adam.vitkov...@swan.sk> > >> In XR its sh mrib route/sh mfib route but in order to get the bw rate >> you have to have the following cmd enabled: >> >> multicast-routing >> rate-per-route >> >> adam >> >> > > > -- > ERCIN TORUN -- ERCIN TORUN _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ -- ERCIN TORUN _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/