Hi All,
Can any one help me in understanding the following output of show inter
transceiver of Cat 6513. Why it is showing Volts = 0.00 and N/A in other fileds
sh interfaces transceiver detail switch 1
Transceiver monitoring is disabled for all interfaces.
mA: milliamperes, dBm: decibels (milliwatts), NA or N/A: not applicable.
++ : high alarm, + : high warning, - : low warning, -- : low alarm.
A2D readouts (if they differ), are reported in parentheses.
The threshold values are calibrated.
High Alarm High Warn Low
Warn Low Alarm
Voltage Threshold Threshold Threshold Threshold
Port (Volts) (Volts) (Volts) (Volts) (Volts)
---------- --------------- ---------- --------- --------- ---------
Te1/7/4 0.00 N/A N/A N/A N/A
Te1/7/5 0.00 N/A N/A N/A N/A
Te1/9/1 0.00 N/A N/A N/A N/A
Te1/9/2 0.00 N/A N/A N/A N/A
Te1/9/3 0.00 N/A N/A N/A N/A
Te1/9/4 0.00 N/A N/A N/A N/A
Te1/9/5 0.00 N/A N/A N/A N/A
Te1/9/6 0.00 N/A N/A N/A N/A
Te1/9/7 0.00 N/A N/A N/A N/A
Te1/9/8 0.00 N/A N/A N/A N/A
Te1/10/1 0.00 N/A N/A N/A N/A
Te1/10/2 0.00 N/A N/A N/A N/A
Te1/10/3 0.00 N/A N/A N/A N/A
Te1/10/4 0.00 N/A N/A N/A N/A
Te1/10/5 0.00 N/A N/A N/A N/A
Te1/10/6 0.00 N/A N/A N/A N/A
Te1/10/7 0.00 N/A N/A N/A N/A
Te1/10/8 0.00 N/A N/A N/A N/A
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
