Dear tim
What DOM values are you getting?
R u also getting N/A in the following fields
High Alarm High Warn Low Warn Low Alarm
Threshold Threshold Threshold Threshold
(Volts) (Volts) (Volts) (Volts)
> Date: Sat, 26 Jan 2013 12:00:58 +0100
> From: [email protected]
> To: [email protected]
> Subject: Re: [c-nsp] sh interfaces transceiver detail ouput
>
> On 23.01.2013 9:57 PM, TJ Trask wrote:
> > I would guess that you don't have DOM support on your transceivers ?
>
> On my Cat6509 12.2(33)SXI10 I can see the DOM values with
>
> sh interfaces transceiver detail
>
> but the Voltage values are all N/A like at Farooq output.
>
> -tim
> _______________________________________________
> cisco-nsp mailing list [email protected]
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
