You second power supply just have 1319.22 Watts, and you need 1431.36 Watts to operate normally, when your power 1 comes down your power 2 do not have enough power to run properly.
Best regards. On Fri, Feb 1, 2013 at 1:09 PM, zaid <[email protected]> wrote: > Hi > > I have 7606 chassis equipped with SIP 400 that reloading from time to time > due to power supply issue, i don't know why in spite of the available power > is 1237.74 Watts > > show power > system power redundancy mode = redundant > system power redundancy operationally = non-redundant > system power total = 2669.10 Watts (63.55 Amps @ 42V) > system power used = 1431.36 Watts (34.08 Amps @ 42V) > system power available = 1237.74 Watts (29.47 Amps @ 42V) > Power-Capacity PS-Fan Output Oper > PS Type Watts A @42V Status Status State > ---- ------------------ ------- ------ ------ ------ ----- > 1 PWR-2700-DC 2669.10 63.55 OK OK on > 2 PWR-2700-DC 1319.22 31.41 OK OK on > Pwr-Allocated Oper > Fan Type Watts A @42V State > ---- ------------------ ------- ------ ----- > 1 FAN-MOD-6SHS 180.18 4.29 OK > Pwr-Requested Pwr-Allocated Admin Oper > Slot Card-Type Watts A @42V Watts A @42V State State > ---- ------------------ ------- ------ ------- ------ ----- ----- > 1 WS-X6724-SFP 125.16 2.98 125.16 2.98 on on > 2 7600-SIP-200 240.24 5.72 240.24 5.72 on on > 3 7600-SIP-400 265.02 6.31 265.02 6.31 on on > 5 RSP720-3C-GE 310.38 7.39 310.38 7.39 on on > 6 (Redundant Sup) - - 310.38 7.39 - - > > > I have this log also > > Feb 1 20:10:43 UTC: %C7600_PWR-SP-4-PSOUTPUTDROP: > Power supply 1 output has dropped > Feb 1 20:10:43 UTC: %C7600_PWR-SP-4-UNDERPOWERED: > insufficient power to operate all FRU s in system. > Feb 1 20:10:43 UTC: %C7600_PWR-SP-4-DISABLED: power to > module in slot 3 set off (FRU-power denied) > > Any idea please if the problem with the power supply or the power source . > > ZH > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > -- *TRANSTELCO | **Francisco Lopez* | Engineering MX: +52 (656) 257 - 1106 | US: +1 (915) 217 - 2235 _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
