Indeed, ref: http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/hardware/Chassis_Installation/Cat6500/0apwsply.html
For the 2700W DC option: ===== Power supply output capacity •1350 W maximum (-48 to -60 VDC, with one DC input) •2700 W maximum (-48 to -60 VDC, with two DC inputs) ===== regards, Tony. >________________________________ > From: John van Oppen <[email protected]> >To: Francisco López <[email protected]>; zaid <[email protected]> >Cc: "[email protected]" <[email protected]> >Sent: Thursday, 7 February 2013 5:22 AM >Subject: Re: [c-nsp] SIP 400 reload due to power supply issue > >Based on looking at that output, I would question if you have all the inputs >on the power supply hooked up. My recollection (although we mostly use the >6500s) is that the 2500 watt supplies (producing ~2300 watts) are the biggest >DC supplies that only take one circuit. I think the 2700 watt supplies >require two feeds to reach full output. > > >Thanks, >John van Oppen >Spectrum Networks >Direct: 206-973-8302 >Main: 206-973-8300 > >________________________________________ >From: [email protected] [[email protected]] on >behalf of Francisco López [[email protected]] >Sent: Friday, February 01, 2013 12:26 PM >To: zaid >Cc: [email protected] >Subject: Re: [c-nsp] SIP 400 reload due to power supply issue > >You second power supply just have 1319.22 Watts, and you need 1431.36 >Watts to operate normally, when your power 1 comes down your power 2 do not >have enough power to run properly. > >Best regards. > >On Fri, Feb 1, 2013 at 1:09 PM, zaid <[email protected]> wrote: > >> Hi >> >> I have 7606 chassis equipped with SIP 400 that reloading from time to time >> due to power supply issue, i don't know why in spite of the available power >> is 1237.74 Watts >> >> show power >> system power redundancy mode = redundant >> system power redundancy operationally = non-redundant >> system power total = 2669.10 Watts (63.55 Amps @ 42V) >> system power used = 1431.36 Watts (34.08 Amps @ 42V) >> system power available = 1237.74 Watts (29.47 Amps @ 42V) >> Power-Capacity PS-Fan Output Oper >> PS Type Watts A @42V Status Status State >> ---- ------------------ ------- ------ ------ ------ ----- >> 1 PWR-2700-DC 2669.10 63.55 OK OK on >> 2 PWR-2700-DC 1319.22 31.41 OK OK on >> Pwr-Allocated Oper >> Fan Type Watts A @42V State >> ---- ------------------ ------- ------ ----- >> 1 FAN-MOD-6SHS 180.18 4.29 OK >> Pwr-Requested Pwr-Allocated Admin Oper >> Slot Card-Type Watts A @42V Watts A @42V State State >> ---- ------------------ ------- ------ ------- ------ ----- ----- >> 1 WS-X6724-SFP 125.16 2.98 125.16 2.98 on on >> 2 7600-SIP-200 240.24 5.72 240.24 5.72 on on >> 3 7600-SIP-400 265.02 6.31 265.02 6.31 on on >> 5 RSP720-3C-GE 310.38 7.39 310.38 7.39 on on >> 6 (Redundant Sup) - - 310.38 7.39 - - >> >> >> I have this log also >> >> Feb 1 20:10:43 UTC: %C7600_PWR-SP-4-PSOUTPUTDROP: >> Power supply 1 output has dropped >> Feb 1 20:10:43 UTC: %C7600_PWR-SP-4-UNDERPOWERED: >> insufficient power to operate all FRU s in system. >> Feb 1 20:10:43 UTC: %C7600_PWR-SP-4-DISABLED: power to >> module in slot 3 set off (FRU-power denied) >> >> Any idea please if the problem with the power supply or the power source . >> >> ZH >> _______________________________________________ >> cisco-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ >> > > > >-- > > >*TRANSTELCO | **Francisco Lopez* | Engineering > >MX: +52 (656) 257 - 1106 | US: +1 (915) 217 - 2235 >_______________________________________________ >cisco-nsp mailing list [email protected] >https://puck.nether.net/mailman/listinfo/cisco-nsp >archive at http://puck.nether.net/pipermail/cisco-nsp/ > >_______________________________________________ >cisco-nsp mailing list [email protected] >https://puck.nether.net/mailman/listinfo/cisco-nsp >archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
