On 03/02/2013 19:20, Tassos Chatzithomaoglou wrote: > That was my initial though too. > But even with two SIPs, each one with one 10G SPA, the problem remains. > That's why i'm > blaming the ESP. > > There aren't any drops shown with the "show...plim"commands.
odd. I also noticed that routerperformance.pdf suggests that the max throughput on an esp20 is 13Gbit/sec @ 25mpps/64 bytes per packet. While this pdf doesn't provide the exact configuration used in the testing, it would seem reasonable to believe that because the figure is > 10G, that there was more than a single sip10 in use. Frustrating not to know what this figure actually refers to :-( Anyway, the public specs are quite clear that the bandwidth available off the ESP20 is fully 20Gbit/sec. If you aren't getting this even with a single 10GE spa per sip10, then this definitely looks wrong and Cisco have some explaining to do. Nick _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
