>> I think the AV-Pair was something like "shell:role=network admin" or >> whichever role you want assigned to that user. I'm using:
shell:roles=network-admin I seem to recall shell:role not working (though that may've been w/ MDS gear) -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Eric Girard Sent: Thursday, February 14, 2013 1:18 PM To: Scott Voll; [email protected] Subject: Re: [c-nsp] Radius Nexus 5k permissions -----Original Message----- >I have Radius setup on my Nexus 5k but I don't have permissions to copy run >start. What is needed on the radius server? >I already have priv level 15. I don't have access to check on the systems that I did this on recently, but I recall that by default the Nexus does not pay attention to the :shell:priv-lvl" Cisco AV-Pair. Since the Nexus uses RBAC by default, I think the AV-Pair was something like "shell:role=network admin" or whichever role you want assigned to that user. Hope that helps, Eric _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
